Anti-Flood Valves : Inline Flow Meters : Solenoid Valves

Anti-Flood Valve Inline Flow Meters Diaphragmless Ejectors Respiratory and Safety Protection Safety Equipment Accessories Water Inlet Accessories

Calibration Columns Check Valves Corporation Cocks, Quills, Main Connects Manifolds Open Channel Diffusers Emergency Chlorine Test Kits Tanks

Anti-Flood Valves - Ejector

For installation in vacuum lines to prevent water backing into metering components. The anti-flood valve provides a visual indication of water backing up from the ejector via drain valve.
	Size Model # Capacity 3/8" Connections for Vacuum and Drain DVH-100 Up to 100 PPD 1/2" Connections for Vacuum & 3/8" for Drain DVH-250 Up to 250 PPD 5/8" Connections for Vacuum & 3/8" for Drain DVH-500 Up to 500 PPD

Inline Flow Meters

Global Treat, Inc. - IFM-Series Provides visual indication and verification of flow rate in cooling water, process water, waste water, ultra pure water and aqueous chemical solutions. • Direct Reading • Mount In Any Position • Cost Effective • PVC and Viton Standard Materials Of Construction • Options: Materials Of Construction and Electrical Switches • Max. Flow Ranges: 3 GPM(20 LPM) - 50 GPM(200 LPM) • Process Connections: 1/2, 3/4, 1, and 1 1/2" FNPT • Pressure Drop: 4PSI @ Full Scale Flow • Temperature/Pressure: 200 PSIG @ 70’F/100 PSIG @ 100’F

Back To Top

Water Inlet Accessories

Plastic Solenoid Valve Feature: • Non Corrosive • Manual Intergral Bypass • 60 HZ/110 VAC/1PH./ N.C.

Size	Model No.
3/4"	GTI-SOLN-3/4
1"	GTI-SOLN-1
2"	GTI-SOLN-2

Brass Solenoid Valve Feature: • Energize to open • 60 HZ/ 110 VAC/ 1 PH/ Normally Closed • Operating pressure range: 0-125 PSI

Size	Model No.
3/4"	GTI-SOLN-BRS-3/4
1"	GTI-SOLN-BRS-1

PVC Check Valve - Water Inlet NPT Feature: • With Viton Seals • 150 PSI at 70 degrees Fahrenheit Non Shock • True Union-Threaded and/or Socket Connections

Size	Model No.
3/4"	GTI-CHK-3/4
1"	GTI-CHK-1
1 ½"	GTI-CHK-1 ½
2"	GTI-CHK-2

Plastic Water Inlet Assemblies Feature: • Non Corrosive PVC • Clear See Thru Strainer • True Union Ball Valve • Liquid Filled Stainless Steel Pressure Guage

Size	Model No.
3/4"	GTI-WI-172ˆ
1"	GTI-WI-173ˆ
1 1/2"	GTI-WI-174ˆ
2"	GTI-WI-175ˆ

ˆNotes: Add-1 for 0-100 PSI range for gauge
Add-2 for 0-160 PSI range for gauge

Plastic See-Thru Strainers Feature: • Non Corrosive • Clear • True Union

Size	Model No.
1/2"	GTI-STR-1/2
3/4"	GTI-STR-3/4
1"	GTI-STR-1
1 1/2"	GTI-STR-1 1/2
2"	GTI-STR-2

Back To Top

Check Valves

All Teflon Check Valves Good For Gas and Liquid • Maximum Working Pressure: 100 psig • Maximum Cracking Pressure: 1 psig • Teflon Spring Loaded - good for any mounting position

Chlorine Gas:
Tubing Connector Size	Part Number
3/8" OD	CHK-TFL-3/8
1/2" OD	CHK-TFL-1/2
5/8" OD	CHK-TFL-5/8

Low Cost In-Line Vacum Check Valves Applications These economical in-line check valves are great insurance to minimize repair to chlorinators due to water back up from ejectors.

100 ppd and less (3/8" Tubing) GTI Part No. TC-CHK-100

250 ppd and less (1/2" Tubing) GTI Part No. TC-CHK-250

Global Treat, Inc.
Phone: 1.800.370.4410
Fax: 281.370.3571
Contact Support for: Water Treatment Solutions

© Global Treat, Inc.