Corporation Cocks : Manifolds : Check Valves : Calibration Columns

Anti-Flood Valve Inline Flow Meters Diaphragmless Ejectors Respiratory and Safety Protection Safety Equipment Accessories Water Inlet Accessories

Calibration Columns Check Valves Corporation Cocks, Quills, Main Connects Manifolds Open Channel Diffusers Chlorine Test Kits Tanks

Calibration Columns
Capacity Model # Size 0 - 0.5 GPH (100 ML) HCC-100 ½" FNPT 0 - 4.0 GPH (250 ML) HCC-250 ½" FNPT 0 - 8 GPH (500 ML) HCC-500 ¾" FNPT 0 - 16 GPH (1000 ML) HCC-1000 ¾" FNPT

Diaphragmless Ejectors

For use with chlorine or sulfur dioxide applications. Diaphragmless ejectors are used in applications where the standard ejectors have failed due to excessive on/off cycling frequency and/or high water temperatures. The minimum back pressure required is 20 psig to ensure proper operation. Capacities: 100, 250 & 500 PPD

Back To Top

Corporation Cock

Chemical Injection is a vital component of any well designed disinfection feed system A corporation cock is the component where the chemical solution interfaces and mixes with the water being treated. Corporation Cocks, also known as Corporation Stops and Mueller Corporation Cocks, are designed for injecting chemical solutions pumped by proportioning pumps and gas chlorinators into tanks, mains, cooling towers and process systems. Chemical Injection Quills, or main connects and diffusers are used to inject chemicals via a nozzle into the center of the stream, thus providing more uniform dispersion. The injection quill assembly and its corporation stop can be removed without having to drain or shut down the system's main connects. In Stock These items are available from Global Treat, Inc. in NPT, or Mueller pipe threaded connections. For assistance in creating a corporation cock specific to your application, Call: 1-800-370-4410

Standard Brass Body Corporation Stops

Size	Description	Model Number
3/4" Assembly	-PVC Wetted Parts -CPVC Wetted Parts	CS-075-PVC CS-075-CPVC
1" Assembly	-PVC Wetted Parts (Standard) -CPVC Wetted Parts -Stainless Steel Wetted Parts	CS-111-PVC CS-111-CPVC CS-111-SS*
1 1/2" Assembly	-PVC Wetted Parts (Standard) -CPVC Wetted Parts -Stainless Steel Wetted Parts	CS-113-PVC CS-113-CPVC CS-113-SS*
2" Assembly	-PVC Wetted Parts -CPVC Wetted Parts	CS-479-PVC CS-479-CPVC

Non-Metallic Corporation Stops Capture Nut, Sleeve & Ring are PVDF (Kynar)

Size	Description	Model Number
1/2" Assembly	-PVC Wetted Parts -CPVC Wetted Parts	CSP-050-PVC CSPC-050-CPVC
3/4" Assembly	-PVC Wetted Parts (Standard) -CPVC Wetted Parts	CSP-075-PVC CSPC-075-CPVC
1" Assembly	-PVC Wetted Parts (& PVC Ball Valve) -CPVC Wetted Parts (& PVC Ball Valve)	CSP-111-PVC CSPC-111-CPVC
1 1/2" Assembly	-PVC Wetted Parts (& PVC Ball Valve) -CPVC Wetted Parts (& PVC Ball Valve)	CSP-113-PVC CSPC-113-CPVC

Hose adapters available:
• 1" assembly - 1' hose adapter
• 1 ½" & 2" assemblies - 1 ½" hose adapter

* Stainless Steel assemblies come with the following connections only:
• 1" - 1" FNPT
• 1-1/2" - 1-1/4" FNPT

Main Connects/Diffusers 1/2" - #HP4747 3/4" - #HP48051 1" - #HP49672

Back To Top

Mainfolds

Horizontal Manifolds C12 and S02 Cylinders

Description	Part Number	Shipping Weight
Single Connection horizontal manifold	HM-121	16 lbs./8 kg.
Dual Connection horizontal manifold	HM-122	26 lbs./13 kg.
Three Connection horizontal manifold	HM-123	36 lbs./18 kg.
Four Connection horizontal manifold	HM-124	46 lbs./23 kg.
Note: 1. Header valve outlet for vacuum regulator mounting will be supplied unless other outlet requirements are specified when ordering. 2. With each connection is included:    • FX-06 flex connector    • IV-1 isolating valve assembly 3. Includes wall mounting brackets. 4. For additional options consult the factory.

Vertical Manifolds C12 and S02 Cylinders

Description	Part Number	Shipping Weight
Single Connection vertical manifold	MA-1	10 lbs./5 kg.
Dual Connection vertical manifold	MA-2	11 lbs./5 kg.
Three Connection vertical manifold	MA-3	13 lbs./6 kg.
Four Connection vertical manifold	MA-4	14 lbs./7 kg.
Note: 1. Each includes:    • Header valve    • 25 Watt heater (24VDC, 120VAC or 240VAC) 2. Inlet connections are CGA No. 820 male threads. 3. For different options for connections consult the factory. 4. Flexible Connectors FX-06 (one per connection).

Back To Top

Drip Leg Heaters

Drip Leg Heater MODEL# HTH-111-500  • 25 watts    • Evaporates slugs of liquid CL2 or SO2 in drip legs    • 6ft. power cord included    • 120 or 240 volts available

Drip Leg Heaters (Pre-Curled) MODEL# HTH-111-500  • 25 watts    • Evaporates slugs of liquid CL2 or SO2 in drip legs    • 6ft. power cord included    • 120 or 240 volts available

Back To Top

Isolation Valve Assemblies

Isolation Valve Assembly MODEL# IVH-100-500  • For Chlorine or Sulfur Dioxide Gas    • Protects cylinder and header valves    • Field proven yoke design    • Epoxy powder coated for maximum corrosion resistance

Isolation Valve Assembly MODEL# IV-1  • For Chlorine or Sulfur Dioxide Gas    • Protects cylinder and header valves

Flex Connector Adapter

Flex Connector Adapter MODEL# A-345  • For Chlorine or Sulfur Dioxide Gas    • ¾" Male NPT x Flex Connection

Header (Cylinder) Valves

Isolation Valve Assembly MODEL# MV-1  • For Chlorine or Sulfur Dioxide Gas

Twisted Cylinder Wrench

Twisted Cylinder Wrench MODEL# 635x3  • Open end fits valve packing nut & cap    • Closed end fits stem and Hydro yoke half-dog bolts

Back To Top

Universal Inlet Adapter

Universal Inlet Adapter MODEL# VRH-740-500  • For Chlorine or Sulfur Dioxide Gas    • Excellent chemical resistance

Flexible Connectors

Flexible Connectors MODEL# FX-06  • For Chlorine or Sulfur Dioxide Gas    • 4, 6, 10 and 16 ft lengths available

Open Yoke

Open Yoke MODEL# Y-628  • For Chlorine or Sulfur Dioxide Gas

Split Yoke Adapter

Split Yoke Adapter MODEL# 5888-E  • Connects open yoke to ¾" NPT

Lead Gaskets

Lead Gaskets  • Various thicknesses available

Open Channel Diffusers

Channel Diffuser

Size	Length
1" Channel Diffuser	12"
1" Channel Diffuser	24"
1 1/2" Channel Diffuser	24"
1 1/2" Channel Diffuser	36"
1 1/2" Channel Diffuser	48"
2" Channel Diffuser	24"
2" Channel Diffuser	36"
2" Channel Diffuser	48"
Note: For special Lengths and/or connections, consult factory.

Back To Top

Chlorine Test Kits

#CN-66 Test Kit Use this kit in conjunction with microbial monitoring to ensure adequate disinfection. The kit includes prepared DPD reagent and a color disc comparator for fast, easy measurements. RANGE: 0 - 3.5 ppm. Our unique color discs feature a continuous-gradient color wheel for fast, accurate comparisons. Simply rotate the color wheel to obtain a color match with the reacted sample.

#CN-70 Test Kit Same as CN-66 Test Kit above, except RANGE 0 - 0.7 ppm

Chlorine Pocket Colorimeter Pocket Colorimeter II Analysis System, Free Chlorine and total Chlorine, 0.02 to 2.00 mg/l and 0.1 to 8.0mg/l, with reagent set (100 tests each, low range, or 50 tests each, high range), manual, and carrying case. USEPA approved/accepted for drinking water (Free, Total) and wastewater (Total).

Tanks

Global Treat, Inc. offers a variety of chemical feed tanks available in different configurations , materials and sizes. Please call us with your specs.

Back To Top

Global Treat, Inc.
Phone: 1.800.370.4410
Fax: 281.370.3571
Contact Support for: Water Treatment Solutions

© Global Treat, Inc.